API client class v1.1.57

- increased minimum required PHP version to 5.5.0
- minor syntax improvement based on Scrutinizer feedback
- added create_dynamicdns() and set_dynamicdns() methods, "borrowed" routes from @smos
- added set_element_adoption() method, contributed by @VWT-Dan
- made a start at changing the function/method comments to PHPDoc format (PSR-5) which will support auto-generated class documentation (https://github.com/php-fig/fig-standards/blob/master/proposed/phpdoc.md#5-the-phpdoc-format)
- added check to throw an error when the $baseurl ends with a / character, thanks to @infraweavers for submitting #66
- fixed issue with logout() on UDM PROs, thanks go to @Olivier6767 for providing access to a UDM PRO, addresses #63
- applied several code styling improvements

README.md

@@ -1,21 +1,29 @@
 ## UniFi Controller API client class
 
-A PHP class which provides access to Ubiquiti's [**UniFi SDN Controller**](https://unifi-sdn.ui.com/) API, versions 4.X.X and 5.X.X of the UniFi SDN Controller software are supported (version 5.12.35 has been confirmed to work). It's a standalone version of the class which is used in our API browser tool which can be found [here](https://github.com/Art-of-WiFi/UniFi-API-browser).
+A PHP class that provides access to Ubiquiti's [**UniFi SDN Controller**](https://unifi-sdn.ui.com/) API, versions 4.X.X and 5.X.X of the UniFi SDN Controller software are supported (version 5.12.72 has been confirmed to work) as well as UbiOS-based controllers (version 5.12.59 has been confirmed to work). This class is used by our API browser tool which can be found [here](https://github.com/Art-of-WiFi/UniFi-API-browser).
 
-This class can be installed manually or using composer/[packagist](https://packagist.org/packages/art-of-wifi/unifi-api-client) for easy inclusion in your projects.
+The package can be installed manually or using composer/[packagist](https://packagist.org/packages/art-of-wifi/unifi-api-client) for easy inclusion in your projects.
 
 ## Requirements
 
-- a web server with PHP and cURL modules installed (tested on Apache 2.4 with PHP Version 5.6.1 and cURL 7.42.1 and with PHP 7.2.24 and cURL 7.58.0)
-- network connectivity between this web server and the server and port (normally TCP port 8443) where the UniFi Controller is running
+- a server with PHP, version 5.5.0 or higher, and the PHP cURL module installed (tested on Apache 2.4 with PHP Version 5.6.1 and cURL 7.42.1 and with PHP 7.2.24 and cURL 7.58.0)
+- direct network connectivity between this server and the host and port (normally TCP port 8443) where the UniFi Controller is running
+- you must use **local accounts**, not UniFi Cloud accounts, to access the UniFi Controller API through this class
 
-## Installation ##
+
+## UbiOS Support
+
+Support for UbiOS-based controllers (UniFi Dream Machine Pro) has been added as of version 1.1.47. The class automatically detects UbiOS devices and adjusts URLs and several functions/methods accordingly. If your own code applies strict validation of the URL that is passed to the constructor, please adapt your logic to allow URLs without a port suffix when dealing with a UbiOS-based controller.
+
+Please test all methods you plan on using thoroughly before using the API Client with UbiOS devices in a production environment.
+
+## Installation
 
 You can use [Composer](#composer), [Git](#git) or simply [Download the Release](#download-the-release) to install the API client class.
 
 ### Composer
 
-The preferred method is via [composer](https://getcomposer.org). Follow the [installation instructions](https://getcomposer.org/doc/00-intro.md) if you do not already have composer installed.
+The preferred installation method is through [composer](https://getcomposer.org). Follow these [installation instructions](https://getcomposer.org/doc/00-intro.md) if you do not already have composer installed.
 
 Once composer is installed, simply execute this command from the shell in your project directory:
 
@@ -94,22 +102,26 @@ Please refer to the `examples/` directory for some more detailed examples which
 
 ## Functions/methods supported
 
-The class currently supports the following functions/methods to GET/POST/PUT/DELETE data through the UniFi Controller API. Please refer to the source code for more details on the functions/methods and their respective parameters.
+The class currently supports the following functions/methods to GET/POST/PUT/DELETE data through the UniFi Controller API. Please refer to the comments in the source code for more details on the functions/methods and their respective parameters.
 
 - login()
 - logout()
 - adopt_device()
 - archive_alarm()
+- assign_existing_admin()
 - authorize_guest()
 - block_sta()
+- cancel_rolling_upgrade()
+- cmd_stat()
 - count_alarms()
+- create_dynamicdns()
 - create_firewallgroup()
 - create_hotspotop()
 - create_network()
 - create_radius_account()
 - create_site()
-- create_usergroup()
 - create_user()
+- create_usergroup()
 - create_voucher()
 - create_wlan()
 - custom_api_request()
@@ -127,12 +139,10 @@ The class currently supports the following functions/methods to GET/POST/PUT/DEL
 - extend_guest_validity()
 - forget_sta() (supported on controller version 5.9.X and higher)
 - invite_admin()
-- assign_existing_admin()
-- revoke_admin()
 - led_override()
 - list_admins()
-- list_all_admins()
 - list_alarms()
+- list_all_admins()
 - list_aps() (deprecated but still available as alias)
 - list_backups()
 - list_clients()
@@ -145,6 +155,7 @@ The class currently supports the following functions/methods to GET/POST/PUT/DEL
 - list_events()
 - list_extension()
 - list_firewallgroups()
+- list_firmware()
 - list_guests()
 - list_health()
 - list_hotspotop()
@@ -156,6 +167,7 @@ The class currently supports the following functions/methods to GET/POST/PUT/DEL
 - list_radius_accounts() (supported on controller version 5.5.19 and higher)
 - list_radius_profiles()
 - list_rogueaps()
+- list_routing()
 - list_self()
 - list_settings()
 - list_sites()
@@ -167,14 +179,17 @@ The class currently supports the following functions/methods to GET/POST/PUT/DEL
 - locate_ap()
 - move_device()
 - power_cycle_switch_port()
+- reboot_cloudkey()
 - reconnect_sta()
 - rename_ap()
 - restart_ap() (deprecated but still available as alias)
 - restart_device()
-- reboot_cloudkey()
+- revoke_admin()
 - revoke_voucher()
 - set_ap_radiosettings()
 - set_device_settings_base()
+- set_dynamicdns()
+- set_element_adoption() (supported on controller version 5.13.X and higher)
 - set_guestlogin_settings()
 - set_guestlogin_settings_base()
 - set_ips_settings_base() (supported on controller version 5.9.10 and higher)
@@ -189,11 +204,11 @@ The class currently supports the following functions/methods to GET/POST/PUT/DEL
 - set_site_name()
 - set_site_ntp()
 - set_site_snmp()
-- set_super_mgmt_settings_base()
-- set_super_smtp_settings_base()
-- set_super_identity_settings_base()
 - set_sta_name()
 - set_sta_note()
+- set_super_identity_settings_base()
+- set_super_mgmt_settings_base()
+- set_super_smtp_settings_base()
 - set_usergroup()
 - set_wlan_mac_filter()
 - set_wlansettings()
@@ -203,26 +218,27 @@ The class currently supports the following functions/methods to GET/POST/PUT/DEL
 - site_ledson() (deprecated but still available as alias)
 - spectrum_scan()
 - spectrum_scan_state()
+- start_rolling_upgrade()
+- stat_5minutes_aps() (supported on controller version 5.5.X and higher)
+- stat_5minutes_gateway() (supported on controller version 5.7.X and higher)
+- stat_5minutes_site() (supported on controller version 5.5.X and higher)
+- stat_5minutes_user (supported on controller version 5.7.X and higher)
 - stat_allusers()
 - stat_auths()
 - stat_client()
-- stat_5minutes_aps() (supported on controller version 5.5.X and higher)
-- stat_hourly_aps()
 - stat_daily_aps()
-- stat_5minutes_gateway() (supported on controller version 5.7.X and higher)
-- stat_hourly_gateway() (supported on controller version 5.7.X and higher)
 - stat_daily_gateway() (supported on controller version 5.7.X and higher)
-- stat_5minutes_site() (supported on controller version 5.5.X and higher)
-- stat_hourly_site()
 - stat_daily_site()
-- stat_5minutes_user (supported on controller version 5.7.X and higher)
-- stat_hourly_user() (supported on controller version 5.7.X and higher)
 - stat_daily_user() (supported on controller version 5.7.X and higher)
+- stat_hourly_aps()
+- stat_hourly_gateway() (supported on controller version 5.7.X and higher)
+- stat_hourly_site()
+- stat_hourly_user() (supported on controller version 5.7.X and higher)
+- stat_ips_events() (supported on controller version 5.9.10 and higher)
 - stat_payment()
 - stat_sessions()
 - stat_sites()
 - stat_speedtest_results()
-- stat_ips_events() (supported on controller version 5.9.10 and higher)
 - stat_sta_sessions_latest()
 - stat_status()
 - stat_sysinfo()
@@ -232,19 +248,30 @@ The class currently supports the following functions/methods to GET/POST/PUT/DEL
 - unset_locate_ap() (deprecated but still available as alias)
 - upgrade_device()
 - upgrade_device_external()
-- start_rolling_upgrade()
-- cancel_rolling_upgrade()
-- cmd_stat()
 
-Internal functions, getters/setters:
+Other functions, getters/setters:
 
-- set_debug()
+- get_class_version()
+- get_connection_timeout()
+- get_cookie() (renamed from getcookie(), deprecated but still available, use get_cookies() instead)
+- get_cookies()
 - get_debug()
-- set_site()
-- get_site()
-- get_cookie() (renamed from getcookie())
-- get_last_results_raw()
+- get_is_unifi_os()
 - get_last_error_message()
+- get_last_results_raw()
+- get_request_type()
+- get_site()
+- get_ssl_verify_host()
+- get_ssl_verify_peer()
+- set_connection_timeout()
+- set_cookies()
+- set_debug()
+- set_is_unifi_os()
+- set_request_type()
+- set_site()
+- set_ssl_verify_host()
+- set_ssl_verify_peer()
+
 
 ## Need help or have suggestions?
 

composer.json

@@ -20,8 +20,9 @@
         }
     ],
     "require": {
-        "php": ">=5.4.0",
-		"ext-curl": "*"
+        "php": ">=5.5.0",
+        "ext-curl": "*",
+        "ext-json": "*"
     },
     "autoload": {
         "psr-4": {

examples/block_list.php

@@ -47,7 +47,7 @@ $unifi_connection = new UniFi_API\Client($controlleruser, $controllerpassword, $
 $set_debug_mode   = $unifi_connection->set_debug($debug);
 $loginresults     = $unifi_connection->login(); // always true regardless of site id
 
-foreach ($macs_to_block as &$mac) {
+foreach ($macs_to_block as $mac) {
     // block_result is always true even if mac address does not exist :(
     $block_result = $unifi_connection->block_sta($mac);
 

examples/config.template.php

@@ -15,8 +15,9 @@
  */
 $controlleruser     = ''; // the user name for access to the UniFi Controller
 $controllerpassword = ''; // the password for access to the UniFi Controller
-$controllerurl      = ''; // full url to the UniFi Controller, eg. 'https://22.22.11.11:8443'
-$controllerversion  = ''; // the version of the Controller software, eg. '4.6.6' (must be at least 4.0.0)
+$controllerurl      = ''; // full url to the UniFi Controller, eg. 'https://22.22.11.11:8443', for UniFi OS-based
+                          // controllers a port suffix isn't required, no trailing slashes should be added
+$controllerversion  = ''; // the version of the Controller software, e.g. '4.6.6' (must be at least 4.0.0)
 
 /**
  * set to true (without quotes) to enable debug output to the browser and the PHP error log

examples/test_connection.php

@@ -17,7 +17,7 @@ require_once('config.php');
  * Check whether the cURL module supports SSL
  */
 if (!curl_version()['features'] & CURL_VERSION_SSL) {
-    print 'SSL is not supported with this cURL installation!' . PHP_EOL;
+    print PHP_EOL . 'SSL is not supported with this cURL installation!' . PHP_EOL;
 }
 
 /**
@@ -25,8 +25,9 @@ if (!curl_version()['features'] & CURL_VERSION_SSL) {
  */
 $ch = curl_init();
 
+if (is_resource($ch)) {
     /**
- * Set the required cURL options
+     * If we have a resource, we proceed and set the required cURL options
      */
     curl_setopt($ch, CURLOPT_URL, $controllerurl);
     curl_setopt($ch, CURLOPT_CUSTOMREQUEST, 'GET');
@@ -50,7 +51,7 @@ curl_setopt($ch, CURLOPT_VERBOSE, true);
      * $results contains the output as returned by the cURL request,
      * returns true when successful, else returns false
      */
-print 'verbose output from the cURL request:' . PHP_EOL;
+    print PHP_EOL . 'verbose output from the cURL request:' . PHP_EOL;
     $results = curl_exec($ch);
 
     print PHP_EOL . 'curl_getinfo output:' . PHP_EOL;
@@ -66,3 +67,6 @@ if (curl_errno($ch)) {
     print PHP_EOL . '$results:' . PHP_EOL;
     print_r($results);
     print PHP_EOL;
+} else {
+    print PHP_EOL . 'ERROR: cURL could not be initialized!' . PHP_EOL;
+}

examples/update_switch_poe-mode.php

@@ -0,0 +1,94 @@
+<?php
+/**
+ * PHP API usage example to turn the PoE of the selected switch ports to "off" or "auto"
+ *
+ * contributed by: @Kaltt
+ * description:    A use case for this script is to turn off the PoE of the port where a camera is connected in order to turn off the camera
+ *
+ * usage:          If the file is called via a web URL, it should be called like: update_switch_poe-mode.php?poe_mode=off
+ *                 If the file is called via the command line, it should be called like: php update_switch_poe-mode.php off
+ *                 The values can be "off" or "auto"
+ */
+
+/**
+ * using the composer autoloader
+ */
+require_once('vendor/autoload.php');
+
+/**
+ * include the config file (place your credentials etc. there if not already present)
+ * see the config.template.php file for an example
+ */
+require_once('config.php');
+
+/**
+ * the site to use to log in to the controller
+ */
+$site_id = '<short site name of a site the credentials used have access to>';
+
+/**
+ * the MAC address of the AC-IW device to re-configure
+ */
+$device_mac = '<enter MAC address>';
+
+/**
+ * $lanports is an array that defines which ports should be changed
+ */
+$lanports = [6];
+
+/**
+ * This is the function that reads out the current port configuration and changes the value for the poe_mode for the ports defined in $lanports
+ */
+function update_ports($running_config, $ports, $poe_mode){
+    /**
+     * Update already non-default ports
+     */
+    $running_config_count = count($running_config);
+    for($i = 0; $i < $running_config_count; $i++){
+        if(in_array($running_config[$i]->port_idx, $ports)){
+            $running_config[$i]->poe_mode = $poe_mode;
+            unset($ports[array_search($running_config[$i]->port_idx, $ports)]);
+        }
+    }
+
+    $add_conf = [];
+    foreach($ports as $port){
+        $add_conf[] = [
+            'port_idx' => $port,
+            'poe_mode' => $poe_mode
+        ];
+    }
+
+    return array_merge($running_config, $add_conf);
+}
+
+$unifi_connection = new UniFi_API\Client($controlleruser, $controllerpassword, $controllerurl, $site_id, $controllerversion, false);
+$set_debug_mode   = $unifi_connection->set_debug(false);
+$loginresults     = $unifi_connection->login();
+$data             = $unifi_connection->list_devices($device_mac);
+$device_id        = $data[0]->device_id;
+$current_conf     = $data[0]->port_overrides;
+
+/**
+ * This reads in the values provided via URL or in the command line, if nothing is set than it will poe_mode will be set to "auto"
+ */
+if (isset($_GET['poe_mode'])) {
+    $poe_mode = $_GET['poe_mode'];
+} elseif (isset($argv[1])) {
+    $poe_mode = $argv[1];
+} else {
+    $poe_mode = 'auto';
+}
+
+$new_ports_config = [
+    'port_overrides' => update_ports($current_conf, $lanports, $poe_mode)
+];
+
+$update_device = $unifi_connection->set_device_settings_base($device_id, $new_ports_config);
+
+if (!$update_device) {
+    $error = $unifi_connection->get_last_results_raw();
+    echo json_encode($error, JSON_PRETTY_PRINT);
+}
+
+echo json_encode($update_device, JSON_PRETTY_PRINT);